AC installation in Texas costs $4,000–$8,500, with high-efficiency or large systems exceeding $10,000. Basic central AC runs $4,000–$6,500, high-efficiency units $6,000–$8,500, heat pumps $4,500–$9,000, and ductwork replacement $3,000–$7,000.
Average Cost Range for AC Installation in Texas
Most homeowners in Texas can expect to pay between $4,500 and $9,000 for a new air conditioning system installation. This includes:
- Equipment (condenser, evaporator coil, air handler)
- Labor
- Thermostat setup
- Basic ductwork modifications (if applicable)
- Local permits and inspections
The AC Installation team at Dr. Watts Electric ensures every job includes system balancing, post-install inspection, and complete electrical compliance — critical steps many low-cost bids leave out.
Cost Breakdown by Factor
| Component | Cost Range | Notes |
| AC Unit (Equipment) | $2,000 – $4,500 | SEER rating, brand, and tonnage |
| Labor | $1,200 – $2,500 | Based on access, system complexity |
| Smart Thermostat | $150 – $400 | Required for zoning and programmable systems |
| Duct Modifications | $300 – $1,000 | Not always needed for replacements |
| Permits & Inspections | $150 – $350 | Varies by city or county |
At Dr. Watts, the team conducts a full load calculation to ensure your system isn’t over- or under-sized — both of which can lead to long-term energy waste.
Cost Per Square Foot / Ton in Texas
In Texas, the average home requires 1 ton of cooling per 500–600 square feet.
- Per Square Foot: $4.50 – $7.50
- Per Ton (12,000 BTUs): $1,800 – $2,400
A typical 2,000 sq ft home may require a 3.5 to 4-ton unit, putting total system cost around $6,500 – $8,000 with installation.
Estimate Your AC Installation Cost
Our licensed HVAC professionals provide complete AC installation services, including load calculations, duct inspections, electrical compliance, and post-install system balancing. Before moving forward, homeowners can use our ac installation cost calculator to better understand expected costs and choose the right system configuration.
Low-End vs High-End System Comparison
Low-End Installations (~$4,500 – $5,500):
- 13–14 SEER efficiency
- Single-stage compressor
- Basic thermostat
- Minimal duct or electrical work
High-End Installations ($8,000 – $9,500+):
- 18–20+ SEER rated systems
- Variable-speed compressor
- Smart thermostat (Nest, Ecobee)
- Duct zoning or air purification add-ons
Higher-efficiency systems may qualify for rebates or tax credits, further offsetting their initial cost.
Additional Costs to Consider
- Ductwork Replacement: $1,500 – $3,500
- Electrical Panel Upgrades: $1,000 – $2,500
- System Removal & Disposal: $150 – $500
- Condensate Drain Line Work: $100 – $300
- Slab/Foundation for Outdoor Unit: $100 – $400
Installers at Dr. Watts Electric handle these items during the initial walk-through, ensuring no surprise charges appear mid-project.
How to Save on AC Installation in Texas
Dr. Watts Electric offers insight-driven consultations to help customers make smarter financial decisions. Ways to reduce overall cost include:
- Scheduling installs during off-peak seasons
- Selecting a properly sized system (not oversized)
- Looking for Texas utility rebates or federal tax incentives
- Bundling AC installation with duct upgrades or insulation services
Is AC Installation Worth the Investment?
Absolutely. For Texas homeowners facing triple-digit heat, an efficient and properly sized AC system is not a luxury — it’s a necessity. New systems installed by certified contractors offer:
- Lower monthly utility bills
- Quieter indoor operation
- Better indoor air quality
- Peace of mind with warranties
Working with a licensed team like Dr. Watts Electric ensures you get long-term value, not just a short-term fix.
FAQ: AC Installation in Texas
How much does AC installation cost in Texas? $4,500 – $9,000, depending on size, efficiency, and system complexity. Is ductwork included in AC install pricing? Only if duct modifications are needed. Full duct replacements are billed separately. What SEER rating is required in Texas? As of 2025, minimum SEER is 15 in most Texas regions. Higher SEER = more efficiency. Can I install an AC myself to save money? Not recommended. Texas requires licensed HVAC contractors, and DIY installs can void warranties and violate code. Are financing options available? Yes — most licensed HVAC contractors offer financing, especially for systems over $6,000.